Welcome, Guest

Learning Center

Photoflex Lighting School

Tuesday, July 10, 2012

Portable Lighting for Studio and Location

Lighting Equipment

When it comes to illustrating lighting tips and techniques, we at PhotoflexLightingSchool® like to challenge ourselves by honing the elements down to their most basic parts. It's important to understand the nature and quality of various light sources so that you can know how to best use them to your advantage when taking pictures.

For eager photographers just starting out, one of the mistakes you can make with lighting gear has to do with over-complicating things. It's very easy to want to throw another light into the mix of your set to try to resolve the lighting. But unless you know what each light is doing, you can spend a lot of time chasing your tail.

In this lesson, photographer Ben Clay keeps things simple and demonstrates some uses of the OctoDome® nxt: extra small studio kit with Grids, for both indoor and outdoor portraits.

(Click on any thumbnail image below for an enlarged view.)

Topics Covered:

  •     The Lighting Gear
  •     A Simple Full-Length Portrait
  •     Accentuating the Window Light
  •     Have Kit, Will Travel
  •     Outside the Fish Market
  •     On the Docks

For this lesson, I wanted to demonstrate the versatility of the OctoDome® nxt: extra small studio kit by using it in both in the studio and on location.

The Lighting Gear

The equipment used in this lesson all folds down very compactly. Here, you can see most of the components that make up this kit (a StarFire™: digital flash and a Small LiteStand are also included).

Figure 1

Here's what you're looking at:
A: Photoflex® Basic Metal OctoConnector
B: Photoflex® Adjustable Shoe Mount Hardware
C: Photoflex® Heavy Duty Swivel
D: Photoflex® OctoDome nxt: extra small
E: Photoflex FlashFire™: wireless kit
F: small screwdriver (not included in kit)

I attached the Adjustable Shoe Mount Hardware to the OctoConnector and tightened it with leverage from a small screwdriver. (The new Adjustable Shoe Mount Hardware allows you to use the larger 3/8" end of the heavy duty brass stud, rather than the smaller 1/4-20 end.) [Figure 2]

I then attached the OctoDome to the OctoConnector. [Figure 3]

Figure 2

Figure 3

Once you have the OctoDome set up, you can mount the hardware to the LiteStand by way of the Heavy Duty Swivel. At this point you're ready to add a shoe flash and wireless receiver. [Figure 4]

Fortunately, this kit comes with both of those: the StarFire™: digital flash and the FlashFire™: wireless kit. I turned both units on and mounted the StarFire™ to the hot shoe of the FlashFire™. [Figure 5]

Figure 4

Figure 5

I then mounted the FlashFire™ to the Adjustable Shoe Mount Hardware and the light was ready to go. For more detailed information on how to set this light up, please refer to the Adjustable Shoe Mount Hardware instruction sheet. [Figures 6 and 7]

Figure 6

Figure 7

A Simple Full-Length Portrait

My assistant, James, had already set up the white seamless paper background and supported it with a Photoflex® ProDuty Support Kit, and our model for the day, Whitney, was all ready for the shoot. We all thought it might be interesting to start by having Whitney's chic dress juxtaposed against her pair of silver rain boots.

For the lighting, I started by having the window light serve as the main light and the OctoDome serve as the hair light. James mounted the soft box to a Photoflex Boom and Boom Stand, then positioned it approximately two feet above Whitney's head. [Figure 8]

Figure 8

I knew that Whitney's left side would fall into strong shadow, so I asked James to set up a LitePanel Kit and position it off to the left to bounce light from the window into the shadows.

Collapsed, the LitePanel frame doesn't take up very much room at all. And since all of the pieces of the frame are shock-corded together, it's easy to pop into place. [Figure 9]

With the frame set up, James attached the Crossbar for added stability. It's also an ideal part of the frame to mount the supporting hardware if you're only using one LiteStand, as you'll see. [Figure 10]

Figure 9

Figure 10

The New LitePanel Kit comes with the new GripJaw™ clamp, which allows you to lock down the frame securely and at any angle. [Figures 11 and 12]

Figure 11

Figure 12

This is an ideal setup for the studio, as you can angle the LitePanel however you want without having to worry about wind knocking it over. Outdoors, it's best to support the frame on both sides with two LiteStands and RockSteady Bags. [Figure 13]

Figure 13

With the LitePanel Kit set up with a Silver panel attached, I fine-tuned its position until I could see the reflection of the window light bounce into Whitney's shadow side.

With everything in place, I went to power up the camera. [Figures 14 and 15]

Figure 14

Figure 15

I took a series of close-cropped shots and saw that the OctoDome was doing a good job at illuminating and separating her hair from the background and that the window light was doing a fairly decent job at illuminating the rest of Whitney. [Figure 16]

Figure 16

Accentuating the Window Light

The look was clean and simple, but I wanted the emphasis to be on Whitney's face, rather than her hair, which seemed to be stealing the show. Since I was only using one light, I repositioned it so that it would serve to accentuate the main window light, rather than compete with it. [Figure 17]

So I took the box off the Boom, mounted it to the LiteStand, placed it in a similar position as the window light, and angled it to illuminate Whitney's face. [Figure 18]

Figure 17

Figure 18

I then took a few shots with and without the shoe mount flash going off. Here, you can see a side-by-side result. [Figure 19]

Figure 19

As you can see from the result on the right, the OctoDome really helped to brighten up Whitney's face, while not detracting from the overall quality of the window light.

In reviewing the images, though, we all decided that the boots weren't really working for this shot, and so we decided to have Whitney wear some classier shoes. Once she changed her footwear, I took a few more shots. Here's one of our favorites of the bunch. [Figure 20]

Figure 20

As you can see, we captured a pretty good full-length studio portrait using just window light and one small additional light source. It just goes to show that you don't always need a ton of lights to get a classic look.

Have Kit, Will Travel

After lunch, we brought this kit on location for some outdoor portraits.

During December in Maine (where we were shooting), you aren't always blessed with tolerable weather for shooting portraits outside; but we happened to get lucky this day as the temperature soared to almost 40˚F! We packed up the OctoDome kit, drove down to Portland's Old Port, and walked down to Fishermen's Wharf, where many of the streets consist of cobble stone, brick and dirt. Perfect for those silver rain boots! [Figure 21]

Figure 21

For the first shot, I had Whitney walk down a side walkway with an old brick building in the background. James set the light up to the left of Whitney, and I tested the transmitter to make sure my wireless connection was good. [Figure 22]

Figure 22

With everything dialed in, I took a series of shots, both with and without the flash going off. [Figures 23 & 24]

Figure 23

Figure 24

Here, you can see a huge difference with the quality of light and overall contrast. Without the strobe going off, Whitney's face falls in shadow while the rest of this backlit shot is fairly well exposed. With the strobe going off, however, Whitney's face and jacket are much more vibrant and really pop off the page.

Outside the Fish Market

Right around the corner from this side street is a great seafood market, which has an old wooden porch out front. For the next shot, I had Whitney stand in front of the building and I came in tight with the telephoto lens. [Figure 25]

Figure 25

One of the great things about using a portable soft light like this is that you can expose the background however you want without affecting the exposure of your subject. As you can see here, I wanted to keep the background somewhat dark so that Whitney would pop off the page, and this was only possible with the OctoDome kit going off.

Here are the results with and without the flash going off. [Figure 26]

Figure 26

On the Docks

Finally, we shot a little further down near where the lobstermen work. This time, I set the OctoDome to the right of Whitney and took a series of shots. [Figure 27]

Figure 27

This shot turned out to be a favorite. [Figure 28]

Figure 28

As you can see, this simple lighting accessory can really make a big difference with with the end quality of your results. Below is a cropped comparison of this scene taken with and without the OctoDome triggering. [Figure 29]

Figure 29

Remember to experiment with your lighting and have fun in the process!


Written and photographed by Ben Clay, contributing instructor for PhotoflexLightingSchool.com.

Modeled by Whitney Stone.

Setup shots by James Helms.

Lighting Equipment


On October 05, 2012 at 02:29 PM, Hamid Ghelichkhani said:

Do you think the moust modeling light yellow OR withe

On October 05, 2012 at 02:29 PM, Hamid Ghelichkhani said:

Do you think the moust modeling light yellow OR withe?
Thank you.

On October 05, 2012 at 02:33 PM, Hamid Ghelichkhani said:

How do you white balance camera in the studio?
thank you.
Have a nice day.

On October 30, 2012 at 03:03 PM, Hamid said:

How do you set white balance your camera in the studio?

On June 02, 2013 at 08:29 PM, Oleesha said:

Brilliant tips. Thanks for that.

On July 21, 2014 at 06:23 AM, Shilo Watts said:

I just like it to be there when I am awake and can do that properly without the cable gttting snagged in my hair (or the models!) lol

ZGood nice work!~!

Leave a Comment





Remember my personal information

Notify me of follow-up comments?