Welcome, Guest

Learning Center

Photoflex Lighting School

Thursday, June 28, 2012

Bouncing and Diffusing Light for Outdoor Bridal Portraits

Lighting Equipment

 

One of the difficulties in shooting weddings or portraits outdoors is that the available light is not always ideal for photographs. In fact, it's usually the opposite. With LitePanels, however, you can effectively modify existing light to make it more visually compelling for your portraits. In this lesson, wedding and portrait photographer Steve Kurtz explores the use of Photoflex LitePanels in modifying natural light while shooting bridal portraits on location. 

 

For this lesson, we photographed two different brides, one with dark features and the other with relatively light features. Keep in mind that different skin tones and eye color can require slightly different lighting treatments. 

LitePanel Set-up

Photoflex LitePanels are lightweight reflectors that are easy to set up. The series of photos below show how the panel frame unfolds and sets up.

Here, we see the White Translucent fabric being attached. 

Diffusing Sunlight

With our first bride in position, we first wanted to show how to diffuse sunlight using a single LitePanel with White Translucent fabric. In this first result shot, the bride is placed in direct, high-contrast sunlight. Notice how she is turned at an angle to the light. Once the LitePanel is in position, you'll see how it will soften the contrast, yet maintain the three-dimensional quality.

Next, our assistant held the LitePanel between the sun and the bride. You can use a LiteStand to hold the LitePanel, but many wedding photographers prefer to use an assistant on a wedding shoot, since the pace is usually fast. The quicker you can move your gear around, the better. 

In the result shot, we see a soft light quality that wraps around the bride's face and body. 

Reflecting Sunlight

Next, we decided to use reflective fabric (rather than translucent fabric) to bounce sunlight into that shadow areas of the brides.

For the full-length bridal portrait, the bride was placed in a shady spot where the sun illuminated the patio a few feet in front of her. If you're going to use a reflector as the main light on your subject, it's usually best to choose a backlit setting. This allows you to reflect sunlight or skylight back into the shadow areas of your subject. Here, we chose an uncluttered natural background for the first bride. 

This set-up shows the assistant holding the Soft Gold LitePanel. Notice that the Panel is off to one side defining the direction of light and the panel is slightly tilted. The other advantage with having an assistant is that they can see the light hitting the subject and can adjust the angle as needed. Here, we chose the Soft Gold fabric to provide a warm glow light for the bride. 

This second perspective shows the distance and angle of the LitePanel to the bride. 

Next, we took some shots with the second bride. For comparison sake, we first took a shot without the LitePanel fill (only indirect sunlight captured here) and then used the LitePanel with Soft Gold fabric as a fill. 

The light in the shot without the fill is relatively flat compared to the light in the shot with the fill, which looks more directional. Another benefit is that the bride's eyes and facial features stand out more with the LitePanel bounce fill. 

The 5-n-1 Reflector

When you need to travel with less equipment, you can substitute your LitePanel system with either the Photoflex 42" MultiDisc 5-in-1 Kit, which features 5 collapsible reflectors, or the new 42" MultiDisc 7-in-1 Kit, which features 7 collapsible reflectors.

Below, you can see the set-up and results of using the more compact MultiDisc gold reflector.

One of the primary advantages to using both the LitePanel Kit and the 5-in-1 MultiDisc Kit is that you have the ability to use different reflective fabrics. The series below shows the results with the White, Silver, and Gold fabrics. 

Conclusion

Managing outdoor lighting situations can be easy if you have the right tools. Note that this lesson has only touched on the basics of additive lighting. 

To see more of Steve Kurtz's work, visit his Pro Showcase page.

 

 

 Follow Photoflex on Pinterest

Lighting Equipment

Comments

On March 12, 2014 at 12:40 PM, Alf said:

Thanks for this little tutorial about photography with reflecting panels. The shown effects and results are marvelous!

Leave a Comment

Name:

Email:

Location:

URL:

Remember my personal information

Notify me of follow-up comments?